Dynamic fuzzy reliability models of degraded hold-down structures for folded solar array

The hold-down structures are of considerable importance to the launch of solar array. Due to the difficulties in obtaining sufficient load specimen, it is imprecise to construct the stress as random variables. Therefore, dynamic fuzzy reliability models are developed in this paper, which resolve the problems in dealing with the interaction between the fuzzy stress process and the stochastic strength process. Even for a deterministic fuzzy stress process, the influences of material statistical properties on reliability can be affected by the level α of fuzzy stress. Meanwhile, the level α relates to investment in the collection of information about the fuzzy stress on hold-down bar. Hence, the models can be used for the economic analysis and optimal design of hold-down bar. Finally, key fuzzy parameters of stress, which have significant influences on both the reliability behavior and the effects of material statistical properties on reliability, are identified and some suggestions for the reliability enhancement of hold-down bar are provided in this paper.     

记录值中的随机序与年龄性质

研究记录值中的随机序与年龄性质．证明了任何通过两个分布函数的行为所定义的随机序,均可以被它们相应的记录值所保持,而两个随机变量之间的剩余财富序,可以导致其相应记录值序列的平均连续增量的序关系．也讨论了K-记录值的连续增量的年龄性质．     

Assessing the reliability of a nanocomponent using nanocrack growth

In nanoscience and nanotechnology, much attention has been given to the dual problem of designing nanocomponents with novel physical properties and how such nanocomponents can be fabricated. Receiving less attention has been the question of the nanocomponent's reliability; how does a nanocomponent fail and how long does a nanocomponent survive under typical operating conditions? High reliability is necessary to guarantee the advancement and utilization of nanocomponents due to the fact that they account for a high proportion of costs of newly designed nanosystems as well as multiscale systems. A nanocomponent is a component that is made of atoms, and its reliability is determined by these atoms. There are situations where it is hard or impossible to extract information from a nanocomponent about its relationship to its atoms. In this article, we assess the nanocomponent's reliability by using its physical properties. Specifically, it is known that nanocrack growth involves considerable statistical variability and such variability should be accounted for assessing growth. In this paper, we first provide a stochastic nanocrack growth model and then evaluate the reliability of a nanocomponent based on this model. Various properties of this model are obtained. We also evaluate the reliability of a nanocomponent under different assumptions on our proposed growth model. This paper is a modification of the extensive literature on modeling fatigue cracks in materials on a larger scale, applied to nanoscale where growth is not a function of cumulative stress on the component but related to the time to first exceedance of a threshold. Copyright © 2013 John Wiley & Sons, Ltd.     

An immersed boundary–lattice Boltzmann approach to study the dynamics of elastic membranes in viscous shear flows

A combined immersed boundary–lattice Boltzmann approach is used to simulate the dynamics of elastic membrane immersed in a viscous incompressible flow. The lattice Boltzmann method is utilized to solve the flow field on a regular Eulerian grid, while the immersed boundary method is employed to incorporate the fluid–membrane interaction with a Lagrangian representation of the deformable immersed boundary. The distinct feature of the method used here is to employ the combination of simple Peskin's IBM and standard LBM. In order to obtain more accurate and truthful solutions, however, a non-uniform distribution of Lagrangian points and a modified Dirac delta function are used. Two test cases are presented. In the first case, we consider a vesicle suspended in a simple shear flow commonly known as tank-treading motion. The computed results were compared with experiments, which showed reasonably good agreement. For the second test case, we consider individual healthy (soft) and sick (stiff) RBCs suspended in a shear flow. The simulation results demonstrated that elastic deformation plays an important role in overall RBC motions characterized as tank-treading and tumbling motions, in which the natural state of the elastic membrane is an essential consideration. In addition, the results confirm that the combination of the immersed boundary and lattice Boltzmann methods permits the simulation of the complex biological phenomena.     

修理工单重定期休假可修系统更换模型研究

针对修理工带有单重休假的单部件可修系统,提出了一种新的维修更换模型.假定系统是可修的,逐次故障后的维修时间构成随机递增的几何过程,系统工作时间构成随机递增的几何过程,在修理工休假时间为定长的情况下,分别选取系统的总工作时间T和故障维修次数N为更换策略,以长期运行单位时间内的期望效益为目标函数,通过更新过程和几何过程理论建立数学模型,导出了目标函数的解析表达式,通过最大化目标函数来获取系统最优的更换策略T*和N*.并在一定条件下给出了策略N比策略T优的充分条件.最后,通过数值例子验证了方法的有效性.     

Some exact solutions of the oscillatory motion of a generalized second grade fluid in an annular region of two cylinders

The velocity field and the associated shear stress corresponding to the longitudinal oscillatory flow of a generalized second grade fluid, between two infinite coaxial circular cylinders, are determined by means of the Laplace and Hankel transforms. Initially, the fluid and cylinders are at rest and at t = 0＋ both cylinders suddenly begin to oscillate along their common axis with simple harmonic motions having angular frequencies Ω1 and Ω2. The solutions that have been obtained are presented under integral and series forms in terms of the generalized G and R functions and satisfy the governing differential equation and all imposed initial and boundary conditions. The respective solutions for the motion between the cylinders, when one of them is at rest, can be obtained from our general solutions. Furthermore, the corresponding solutions for the similar flow of ordinary second grade fluid and Newtonian fluid are also obtained as limiting cases of our general solutions. At the end, the effect of different parameters on the flow of ordinary second grade and generalized second grade fluid are investigated graphically by plotting velocity profiles.     

On the shear centre in Saint-Venant beam theory

The notion of shear centre in Saint-Venant beam theory was introduced by Robert Maillart who envisaged it to explain the results of experimental tests on beams with C-shaped sections. In literature, the location of the shear centre is provided in terms of flexure functions. The new result is a formula for the shear centre, based on the knowledge of the sole twist warping function of the cross-section.     

Characterizing fracture energy of proton exchange membranes using a knife slit test

Pinhole formation in proton exchange membranes (PEM) may be caused by a process of flaw formation and crack propagation within membranes exposed to cyclic hygrothermal loading. Fracture mechanics can be used to characterize the propagation process, which is thought to occur in a slow, time‐dependent manner under cyclic loading conditions, and believed to be associated with limited plasticity. The intrinsic fracture energy has been used to characterize the fracture resistance of polymeric material with limited viscoelastic and plastic dissipation, and has been found to be associated with long‐term durability of polymeric materials. Insight into this limiting value of fracture energy may be useful in characterizing the durability of proton exchange membranes, including the formation of pinhole defects. In an effort to collect fracture data with limited plasticity, a knife slit test was adapted to measure fracture energies of PEMs, resulting in fracture energies that were two orders of magnitude smaller than those obtained with other fracture test methods. The presence of a sharp knife blade reduces crack tip plasticity, providing fracture energies that may be more representative of the intrinsic fracture energies of the thin membranes. Three commercial PEMs were tested to evaluate their fracture energies (G_c) at temperatures ranging from 40 to 90 °C and humidity levels varying from dry to 90% relative humidity (RH). Experiments were also conducted with membrane specimens immersed in water at various temperatures. The time temperature moisture superposition principle was applied to generate fracture energy master curves plotted as a function of reduced cutting rate based on the humidity and temperature conditions of the tests. The shift with respect to temperature and humidity suggests that the slitting process is viscoelastic in nature. Also such shifts were found to be consistent with those obtained from constitutive tests such as stress relaxation. The fracture energy is more sensitive to temperature than on humidity. The master curves converge at the lowest reduced cutting rates, suggesting similar intrinsic fracture energies; but diverge at higher reduced cutting rates to significantly different fracture energies. Although the relationship between G_c and ultimate mechanical durability has not been established, the test method may hold promise for investigating and comparing membrane resistance to failure in fuel cell environments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 333–343, 2010